Product Description:
【Rf Cable Assemblies】SMA male to SMA female cable, Cable Type: RG178; Conductor Material: Pure Copper; Connector Material: Gold Plated; Cable Length: 25cm (9.8"); Impedance: 50 ohm, Low Loss 【Durability and Performance】The connector is made of pure brass to ensure its durability and recycling to ensure good conductivity and signal transmission, with strong resistance to signal interference.
This is a basic SMA (Subminiature A) male to female connector cable. Can handle frequencies up to 17 GHz. The SMA connectors on each end are small enough for most consumer GPS, cellular, and other RF applications, and they use threaded housings to connect to create a strong mechanical connection. 【Application】These are suitable for mounting the antenna to the outside of the case while keeping the electronics neatly inside. Widely used in antennas, radio scanners, car transmitters, CB radios, antenna analyzers, Wi-Fi radios, GPS antennas, RF equipment, wireless infrastructure test equipment, etc.
MHZ-TD-A600-0088
Electrical Specifications |
|
Frequency range(MHz) |
0-6G |
Conduction impedance(Ω) |
0.5 |
Impedance |
50 |
VSWR |
≤1.5 |
(Insulation resistance) |
3mΩ |
Maximum input power(W) |
1W |
Lightning protection |
DC Ground |
Input connector type |
|
Mechanical Specifications |
|
Dimensions (mm) |
250MM |
Antenna weight(kg) |
0.6g |
Operating temperature(°c) |
-40~60 |
Working humidity |
5-95% |
Cable color |
Brown |
Mounting way |
pair lock
|